All in a day's work at the reloading bench, 17 Ackley Hornet and 577 Snider.
All in a day's work at the reloading bench, 17 Ackley Hornet and 577 Snider.
Hold Still Varmint; while I plugs Yer!
I wear a Golf Glove, it helps with grip and protects my right hand. The gun is a 4" Redhawk and the load is 20g of 2400 under the NOE 429421, the BC 1103 and the MP 503 clone, 100 of each.
Right handed people need to shop for a left handed glove and Left handed a right glove. Golf!
Mal
Mal Paso means Bad Pass, just so you know.
Prepped 2nd Dillon 650 to start loading SPP, as I have collected about 800-+. Of the little devils, will probably shoot em and add to the scrap bin. 45ACP
Last edited by Hossfly; 06-10-2021 at 08:18 AM. Reason: Add text
"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government..... When the people fear their government there is tyranny, when the government fears the people, there is liberty." Thomas Jefferson
Reloaded 300g lfp 45-70 over varget, and some 175g gc 8mm mauser over imr 4198
The New Hornady Manual arrived today!!
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Started deriming 22 or cases.
QUIS CUSTODIET IPSOS CUSTODES?
Found two 16 oz fishing weights here in a warehouse in UAE. Will be in the next flat rate box home
CD
De Oppresso Liber
Irag: 91,03,04,05,06,08,09',15', 16',22-24'
Afghanistan: 09,10,11',14',17'-21'
Cast 350 175 grain .401 boolits.
Gathered up the necessary stuff to post a new PIF Deadline is 06-22-2021 @ 1 p.m.
Sorted the second batch of Lee 356-125-2R from a mold JonB_in_Glencoe alerted me to. I never cast anything so tiny but I rejected less than 15% from the second batch. Most of the rejects were when the mold cooled when I broke rhythm. I think I'll build an air cooled drop box with a towel on a slope so I don't have to look for a new place to drop the boolits each time. With 250g boolits there's plenty of time. I'm also used to having a steel sprue plate, easier to get sharp edged bases. These are close enough to be sharp after the sizer though.
I just did a 3rd run, maybe 30 lbs of alloy, the darn sprue pile is bigger than the boolit pile. Started out too hot and dialed the hot plate back. I've been marking the dial. I waited a minute for the mold to cool, the second cast was in the groove. It takes very little time for the mold to cool. Think I got 6-700 out of the last run.
Last edited by Mal Paso; 06-13-2021 at 11:10 PM.
Mal
Mal Paso means Bad Pass, just so you know.
Not today, but yesterday. Assembled 300ea. .40 cal with cast boolits that I made on Saturday.
Got a hold of some hard to get black powder cartridge reloading dies. They hadn't been used for quite a few years. Home was a box up on a shelf in a garage. Two of the sets were missing a die body so I've emailed Redding and RCBS about replacements. Still usable but having to swap bodies is a pain.
Got out the tub, brushes, and sprays to turn them back to almost like new condition.
Last edited by MOA; 06-15-2021 at 03:39 AM.
[SIGPIC][/SIGPIC]
I played musical scopes yesterday. Now I have 3 rifles to sight in. So far.....
Sent from my SM-A716U using Tapatalk
I cast another 500 MP 357 125g hollowpoints this afternoon. They look like perfect little mini devastators.
Mal
Mal Paso means Bad Pass, just so you know.
Sorted several hundred 30 carbine brass
This afternoon I spent sometime loaded 50 rounds of 45, 230 grain JHP.
Last edited by Dekota56; 06-16-2021 at 09:23 PM.
The Soldier that Volunteers, fighting for his Country and his rights,
makes the most reliable Soldier on Earth.
Made 46 9.3x 57 cases from new Winchester red bag 8 mm.
The other 4 had wrinkles and creases in the necks to begin with so they are being used to make dummies.
Did a complete written inventory of all my rifle and pistol dies by caliber, including the accessory equipment that went with them such as case preparation tools. Took all day but at least I know what I have and it is labeled as to caliber in plastic containers in an old bookcase that I cabbaged for the task. I had an old inventory but it was well out of date and useless. Now to update my primer, powder, and bullet inventory.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |