What’s the outside diameter of the Lee Case Feeder tubes?
Hoping they are 5/8” (0.625”) to use on my RCBS green machine.
Checking before I order those or bulk polycarbonate tube
What’s the outside diameter of the Lee Case Feeder tubes?
Hoping they are 5/8” (0.625”) to use on my RCBS green machine.
Checking before I order those or bulk polycarbonate tube
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
Lee Case Feeder tubes apr 9/16 with a tape measure, or .565
Thanks!
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
Just go to a hardware store and match up some pex tubing. You wind uppaying about two bucks for 4 foot of it. If by any chance the outside diameter is a little too big you can always sanded down.
Long, Wide, Deep, and Without Hesitation!
1/2” copper and cpvc line are 5/8” od…
But I want clear.
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
Last edited by Dieselhorses; 06-14-2021 at 12:47 AM. Reason: add
The unexamined life is not worth living....Socrates
Pain, is just weakness leaving the body....USMC
Fast is fine, but accuracy is FINAL!....Wyatt Earp
Greetings,
I made two 4 tube case feeder wheels and used Lee tubes & collator for my Green Machine (RCBS are 5 hole wheels #86532).
I wonder if RCBS Pro Chucker 7 case feed tubes would work (part# 20000211)?
Tube outside diameters per manufacturer:
RCBS = .625
Lee = .562
Dillon = .720
Star = .650
Hope this helps,
Wes
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |