Got in some SMOKES 4320 powder toady. Orange /brown & John Deere green. My second attempt at coating. My first w ith SMoKES 4320. First attempt with Harbor Fright PC was not good. Put some SMOKES powder in an old cool whip tub ( about 1 1/2 tsp ) along with half of my 1000 Air Soft black BB's, 50 to 60 bullets . 44 cal bullet sized with GC. Swirled around for about 45 sec's. Bullets were well coated. Pre heated my oven to 375dg. Set for Air Fry, not bake. Made sure no bullets were touching. Bullets were handled with needle nose pliers only.Touching with bare fingers will remove the coating. Bhttps://castboolits.gunloads.com/sho...raying-bulletsullets placed on non stick aluminum foil. After bullets had been in for 12min I looked thru the glass door & bullets were slick/shinny. Took them out & allowed to cool. Resized thru my .430 sizer. I did three batches of about 50 bullets per batch. Still had enough powder left in the tub to do at least 50 more. This is my second attempt & I am well satisfied. Will be a day or two before I can shoot, but all looks well.Attachment 284156