After nights of research I got a 8# jug of WC872 to see how it would do in my Rem 700 30.06 with a NOE 202gr (311299). Went to the range today and brought my portable reloading press so I could change load data on the fly. I started with 46gr of 872 and a dacron filler. I loaded 3 rounds, fired them recorded the hits and moved up 1 gr at a time until I reached 51gr of 872. 46gr was a pleasant load in the recoil department but 51gr was becoming a bit heavy on recoil. All shots were taken at 100 yards from a bench to get the best possible rest I could get. The small squares are 1" and the large squares are 4". On a side note I used standard primers and had zero misfires. The powder went off like it is supposed to every time. There was unburnt powder but a dry patch through the barrel cleaned it right up.
46 + dacron
47 + dacron
48 + dacron
49 + dacron
50 + dacron
51 + dacron
There wasn't much difference in the groups no matter what load. Think I'll stick with the 46gr load for now. I do plan to try a NOE 311165 rf next with this powder.