Hello - I'm contemplating a custom mold order (Accurate Molds 35-125C or 35-125E) for my Springfield XDS 3.3 in 9mm. I'm not sure I'm comfortable slugging my barrel so before I attempt it, I thought I'd ask you fine folks if there are any XDS 9mm owners who have already done so and could share your results. I know it can vary based on reamer age, etc. but hoping I can count on it being consistent enough within that make/model for selecting a mold diameter and sizing die (at ~+0.001).
I'd also be curious if anyone has experience with the two bullets I'm looking at. The 35-125E has a stepped leading band which is advertised to be for guns with "tight throats" which my forum search did reveal may apply to the XDS. I want to be able to use this bullet in other guns - by ordering the 35-125E to ensure function in the XDS, am I compromising anything significant with other guns? I'm guessing maybe a slight reduction in accuracy due to the longer jump to the lands but the way I shoot, I can live with that. Function and avoidance of leading are my primary concerns.
For reference - https://www.accuratemolds.com/catalo...catalog-anchor
Thanks in advance!