Sizing down 224 gr soft lead GC boolits to .3565 for the 350 Legend. Cast from the DIY five hole boolit mold. Willing to post pictures but cannot load from my phone to the pc Windows ten. Working on it.
Sizing down 224 gr soft lead GC boolits to .3565 for the 350 Legend. Cast from the DIY five hole boolit mold. Willing to post pictures but cannot load from my phone to the pc Windows ten. Working on it.
Today's Project - 303 Savage
Been meaning to show this for a while. Finally the brass came in this morning on CanPar. I think this was the last bag of 303 Savage brass on the West Coast. Found some others in Ontario with some in stock.
As you can see by the Product placement maybe the suppliers will reward me for being their shill on this post. One can only hope.
50 New PPU brass, Hornady 150 gr RN Interlock bullets, Hodgdon's H4895, Federal Match LR Primers. Found I needed to lube the inside of the necks a little with Lee's and things went fine. BTW, Lemon Pledge makes for a great case lube. Necks seem quite thin compared to other cases. Well, we'll see how they shoot.
48 out of 50 - 30/40 Krag resized to 25 Ackley Krag AI - only lost two! I think I added a pic.
BTW, I took the pic with my phone, e-mailed it to myself resized to 25%, added it to an album on this computer, found it and added it to this thread - should have rotated it first! If you click on it it rotates! Don't know how that works.
Last edited by Wayne Smith; 04-19-2021 at 10:47 AM. Reason: discovered something
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I FOUND 6 BOXES OF .32S&W Long, Finally!!
HooRah !!! Roo Hoo !!!
I HATE auto-correct
Happiness is a Warm GUN & more ammo to shoot in it.
My Experience and My Opinion, are just that, Mine.
SASS #375 Life
Loaded 140 30-30 with PC'd boolits. Went to shoot them and noticed hard closing of the lever on some rounds. Discovered some of the boolits slumped a little. Oops. All but one loaded and fired. Live and learn. Came home and annealed some brass.
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
8gr 2400 under 170 gr in 300BO cycles and BHB. Pistol gas. ~ 850 fps (cfepistol works too). Loaded 30 with 17gr H110 and 145gr GC PC to feed the carbine.
I have PC Lyman 401043s and had a couple that were wonky. Think I'm going to start looking at the brass. What kind of wonky? Brass usually isn't the problem.
Whatever!
Not much. Set gas checks on some -156's and -315's for son to PC. Started searching through pile of Flat Rate boxes trying to find some more Lino. Found Foundry, Mono, 50/50 solder - but haven't found any more Lino. Dang!
Echo
USAF Ret
DPS, 2600
NRA Benefactor
O&U
One of the most endearing sights in the world is the vision of a naked good-looking woman leaving the bedroom to make breakfast. Bolivar Shagnasty (I believe that Lazarus Long also said it, but I can't find any record of it.)
Packed it up because, the Lord willing, we’ll be moving.
Cast about 400 40s - I had 10 lbs more staged on the hotplate but the wife came in and wanted to go walk to the beach...
WWG1WGA
Loaded up 200 357's. Got a new scope put on my henry. Cast some 45/70's
Set up the pot and cast a couple hundred plain based .358, 158 gr. boolits. The pic at the top of the page has me envious but I only have two cavity moulds. Once I sort through them I will powder coat with Smoke's JD Green. All for my two .357 mag. rifles. One is a Marlin 1894C and the other is a Ruger 77/357. Weather is getting nice. I want to have a walking-around gun like I wanted when I was a kid.
Loaded up the last of the Accurate 30-157 grain in 30-30 cases with 7 grains of Red Dot. Planning on casting more tmro. Then switched gears and loaded 100 RCBS 270-150 grain boolits with 10 grains of Red Dot. These are powder coated and the first PCed boolits im gonna run through the Win M70 tmro.
I annealed 100 7BR cases and prepared them for loading: neck sized, expanded and belled the case mouths, and primed.
you guys casting are making me envious...
Well yesterday I loaded 60 rounds of 308s with culled cast boolits that had slight imperfections to shoot around the house .
Now I'm going to go shoot some of them .
More on the story
They shot horrible
Last edited by toallmy; 04-27-2021 at 09:00 PM.
Cast around 400 30-157 Accurate boolits this afternoon. Really need to pony up for a 5 or 6 cavity, the two cavity is slow going.
I loaded up some 140 grain.38/.357 cast from my new NOE brass mold resized to .357.” I’m trying to get a load I can use in my S&W 642,586, Winchester carbine. It’s an ongoing project. I have decided & had reasonably good results with +P .38 specials using Universal,Unigue, A#5. I miked the 642 & Winchester to .356. Both are tighter than the S&W 586 which is .358. Will get out to do some range work soon. I will let you know if you’re interested.
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |