How is everyone loading oversized boolits for various milsurplus rifles? I ran into seating die issues of boolit too large to fit through/in the die. For .316 in a .303 it won’t fit through the Lee Loader seater, so I place the boolit on the case then the seater over the whole works. NOE .289 7x57 boolits would not fit RCBS die, I made a seater die out of a 7x57 barrel reamed .290 and use a Bald Eagle arbor press. I use this press for seating boolits in several calibers that I load with Lee Loaders.