What’s everyone’s favorite polish to add to your media to get the shiniest case
Jim
What’s everyone’s favorite polish to add to your media to get the shiniest case
Jim
My anger management classes are pissing me off!
I like and use iosso polish.
"Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson
Brasso
Nu finish car polish
+1 for Nu-Finish car wax.
I use Nu finish, too. I used Brasso before but stopped when I found out it contains ammonia and that can weaken brass.
Rooster Labs - Rooster Bright Brass Cartridge Case Polish
ryan@roosterlab.us
Made for treating and rejuvenating polishing media .
I got my can from Midway USA , follow the directions and do not add too much to dry media ...
Too much liquid makes dry media damp and clumpy and it doesn't work as well .
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
2 tablespoons Armor all wash and wax and 1/4 teaspoon Lemi Shine,
The two enemies of the people are criminals and government, so let us tie the second down with chains of the Constitution so the second will not become the legalized version of the first. - "Thomas Jefferson"
NEVER use BRASSO or any other polish that contains ammonia! It weakens the brass severely over time. I do not even allow Brasso in my antique restoration shop, just like MinWax! I have seen so many brass items destroyed by Brasso. And it will weaken your shell casings!
I started out using New finish. Then i used Mothers chrome polish. Now im using Turtle wax brand of chrome polish. I can not tell any difference how they work. They all do fine. The Turtle wax brand is the cheapest per ounce at Walmart.
One round at a time.
Member of the NRA,GOA and FAOC. Gun clubs Zerby rod and gun club. Keystone Fish and Game Association.
Wet tumble so the cases are actually clean
I have been wet tumbling with SS pins for about 3 years now. I've had zero problems with cases tarnishing. I use a small amount of auto wash & wax in the final rinse though. My cases never got this clean when I used either walnut or corn cob media and the tumble time with SS pins is shorter.
NuFinish. Dillon before that and Flitz before that. Most of them work fine.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |