I'll wager McCrower might love some details.... Which plate and slider used successfully would be a great start.....thanks for your posts.
On another subject.....are there any users out there besides me who use RCBS's Pro 2000 progressive press?
It's just that I hate projects that only benefit me.....there are other things you can do with 3D printers to enhance reloading than just collators and feeders. Such as ....... adding Lights and Camera, for example.
I posted a video of it in the main reloading section in Castboolits Reloading.......where Pro 2000 users might see it.
Last edited by GWS; 03-18-2021 at 11:12 AM.
Hopefully in the next day or so I will be rolling out some case feed adapters for the dillon. They will directly replace the dillon adapter and allow the spring connector to link directly into it. Eliminating quite a few pieces and adapters needed. I already have a list of calibers that I plan to come out with. Please let me know if you would need a different caliber than listed and I will do my best to create it.
9mm
40 S&W
10mm
45ACP
44 Mag
380
223
300 blackout
6.5 Creedmoor
308
hey Tyler
Just an update I have included pics of the feeder I think we need to extend the base below the bearings to accommodate for the dropped bullet when actuated as of now the bullet drops on activation to the middle of the bullet and locks as the bearings try to reengage. also the inner barrel could be sized maybe .5mm wider to accommodate the bullet a bit more.
also including a pic of the 45 bullet slide for the app press fits good enough diameter but needs to be 12mm taller by my measure to cover the bullet for feeding.
Thanks my friend
I understand the issue with the die. The round you are loading is 405 grain, 25.5mm long boolit. I am not a 45-70 guy. Can you give me a rough range of what the length of these bullets are across common weights?
Regarding the 45 bullet slide, It should not be necessary to have the boolit completely covered by the slide. What does matter is the length of the insert though. Which insert were you using?
Hi,
I just want to share this little handle/cover I made today for TylerRs slip clutch, I have printed it in PETG and it works perfectly in both my AM bullet feeder and Rifle Case Feeder
It is designed to be tapped and it replaces "slip_clutch_ring.stl".
You need openSCAD to generate stl, feel free to change it to make it work for you.
Rafal
Broken link (I think it just got outdated).
Current (as of 19 March 2021) https://www.dropbox.com/sh/xczanojq6...C9SVfdjza?dl=0
It is also in TylerR's signature as Downloads
ok tryed some boolits on the app i see what you mean all need is to shorten the insert
may have a bigger problem on the app
the punch does not push the first boolit farr enough through for the next to be fully dropped as it is the die had to be run further down so the first would drop have to think on this problem
Has anyone found a particular brand of filament that’s a good match for the Dillon blue?
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |