I was wondering if any one used A 410 in place of A 2400 for all that the 2400 is used for? Since I seen on one burn chart they are next to each other.
I was wondering if any one used A 410 in place of A 2400 for all that the 2400 is used for? Since I seen on one burn chart they are next to each other.
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
I'm using it in the .30 Carbine with cast bullets. It definitely burns faster than 2400, but I'm getting really good accuracy.
35W
The biggest waste of time is arguing with the fool and fanatic who doesn't care about truth or reality, but only the victory of his beliefs and illusions.
There are people who, for all the evidence presented to them, do not have the ability to understand.
NRA Life Member
ok so it looks if used to do the normal min charge and work up with the 2400 data
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
I haven't used it enough yet to answer that question. I did try one load with jacketed bullets, but got crazy extreme spreads, but everything is normal with cast bullets. But yes, I'd suggest starting at or below a 2400 min load and work up, using a chronograph of course.
35W
The biggest waste of time is arguing with the fool and fanatic who doesn't care about truth or reality, but only the victory of his beliefs and illusions.
There are people who, for all the evidence presented to them, do not have the ability to understand.
NRA Life Member
i use a410 in a mec 650jr with a powder bushing 13 and its the same load for 2400...and a410.....
sorry its a #12 bushing.and yes check the amount thrown by the bushing to your load book.in my instance the bushing throws the right amount of a410 or 2400 for my 410 loads.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |