Does yours go to full cock on opening like the originals, or is it lawyerized, requiring a manual thumbing back to fire? Seems like at least the set-trigger versions have been put together that way.
Does yours go to full cock on opening like the originals, or is it lawyerized, requiring a manual thumbing back to fire? Seems like at least the set-trigger versions have been put together that way.
WWJMBD?
In the Land of Oz, we cast with wheel weight and 2% Tin, Man.
I've got three Ubertis and a Pedersoli...3 Highwalls and a Low Wall...all drop to half-cock on closing.
Bill
"I'm not often right but I've never been wrong."
Jimmy Buffett
"Scarlet Begonias"
Hello Bigslug,
I have 2 Uberti's and one original.
Both Uberti's rest on half cock and the original rests at full cock.
I wouldn't call it "Lawyerized", just a safety feature.
It doesn't bother me to pull the hammer back.
I guess if it were a repeater, I'd not like it.
AntiqueSledMan.
Thanks guys. That's what I needed.
Bummer. No Italian .357 in my future then. The Martini-ish ability of the original to stuff, close, and shoot was the main appeal of the concept. Marlin lever gun it is then.
WWJMBD?
In the Land of Oz, we cast with wheel weight and 2% Tin, Man.
My Uberti 1885 40-65 was also half-cock at closing from the beginning.
Also impossible to take out the block down for cleaning, the hammer hits the lower tang.
Compared it to my original Winchester 1885 Highwall, and grinded away some metal on the lower tang.
Now I can take out the block with hammer downwards.
Side effect, it cocks to full cock on closing.
The block goes lower on opening and ejects the cases, does not snag on the hammer anymore.
Win-win solution
Originals started out staying at full cock when closing, and later were changed also. So these newer guns aren't really a change from what Win. switched to either.
the fly in the hammer is for a set triggeg,the standard trigger doesn't have a fly
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |