I looked out the window at my shop with the storm damaged flue pipe and said not today too cold.
My hand press is in a box behind me but just not feeling it today.
I looked out the window at my shop with the storm damaged flue pipe and said not today too cold.
My hand press is in a box behind me but just not feeling it today.
Sized and Primed another 200 30-06 cases that will be loaded up to M-2ball specs'
Out of boredom primed 1000 45ACP cases with the Frankford Arsenal hand priming tool.
Not in the reloading room, but I finally finished trimming the 976 pieces of 30 Carbine brass I got off of Gunbroker. Took me about a week sitting in front of the TV and using the RCBS prep center with a Lee trimmer installed. About half were WRA 52 so I had to swage those ones too.
Still have about 4000 pieces to go. At this point I'm wondering if I'll actually get them all done in my lifetime.
Loaded up about 500 of these 148 gr PC button nose wadcutters in 38 special. Same as Lyman 358091, but I've got a Cramer mold, no bevel base. First time posting a pic from my own files, hope it comes out right side up.
ETA: Well, dunno what I can do different. But, when you click on it, to bring it up in a separate frame, it flips it 90 degrees, like I loaded it.
Well done, great picture
Stay warm
Mike
NRA Benefactor 2004 USAF RET 1971-95
It is a lee 90366.
Flat nose gas check.
Board won't let me load pics but if you need a pic of the projectiles pm me your email addy or cell number and I'll email or text you a pic.
These should be decent in 30-30
EBay has a few up right now. No retailers I've found have them.
Got the casting fever today,so cast up 4.5 pounds of 311-165 RD slugs, thanks to A fellow member who sold me a mold, 7.53 pounds of Lee. 312-155 for use in the .308 and. ‘06, and 5 pounds of
Lee 30-150 RNFP for the30/30. Now to powder coat and size, then gas check . That’s enough for today.
I firmly believe that you should only get treated by how you act, not by who or what you are!!
Removed the crimp from the 300 BO cases I made yesterday. Then GC'd/PC'd 258 NOE 311-165 FNs... Should be shooting 300 BO in a couple weeks!
WWG1WGA
While having morning coffee.. I mentally planned out what .358 mold I was going to dig thru my pile and look for and decided to sort thru a bag of range brass. All of this was planning.. nothing actually has happened.. yet.
Hand primed 1200 .40 s&w with a RCBS tool while watching it snow.
Loaded a few 174gr HPBT .311" Sierra and some 314 90 SWC to try out in Smelly- but the white stuff changed my mind.....
Sent from my SM-A716U using Tapatalk
My older brother passed away last month, got my dads 38 SPL. been working on loading some of them.
Aim Small Miss Small
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
What I do there?
Shivered! Then fired up the wife’s Kubota and plowed snow! (It’s got a heated cab)
Three44s
Quote Originally Posted by Bret4207
“There is more to this than dumping lead in a hole.”
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |