I made a batch of Flexi intending to apply by Pan Lube. I have done this several times, trying different methods to get the bullets out of the lube but have yet to find a simple effective method.
When I tried to just lift them out, the Flexi lube came off the billets.
Cutting them out with an expanded case, gets them out but then you have to extract them from the case.
I driller out the primer pocket and push them out of the case with a punch. Before all that you have to expand a case and a fired case is not sufficiently oversize. so you have to oversize it some more.
I am thinking about getting a cheap pair of needle nose plyers and modifying the nose so it will grip the bullets above the lube groves. Then heat the bullets to 200 deg F, dip them in hot Flexi up to the top of the lube groves and set them down on wax paper to cool. Then size.
Short of laying out $300 for a sizer / liber and dies, is there a simpler more effective method?