If you post your location in your profile someone nearby might invite you to become more familiar with the options.
I started with a Dillon SDB, added a used Hornady LNL, rebuilt the LNL, sold the LNL, bought a new 650 and casefeeder, bought a used 650 and casefeeder, sold the SDB, added bullet feeders to the 650’s.
Based on my experience, I’d start with the SDB. It takes proprietary dies, and only has 4 stations, but it is relatively small compared to the other options, and is easy to operate and reliable. With a SDB you’ll never double charge unless you disable the safety linkage or don’t clear the shellplate when you have a stoppage, there is no need for a powder cop if you pay attention as you’re seating the bullet by hand. If you later decide that you want another press you can sell it in hours for 75% of new or better.