I recently acquired one of these in 270 Win. It didn't come with instructions. I found a set on here. To bad it has the Photo Bucket across it. I can still read them ok.
Now having a set in hand there are things about it I like.
The Micrometer adjusting seating I like.
Coming with the case length gauge and cutter/lock stud is good too. The pilot for the case length gauge is steel, another thing I like. The current ones are aluminum.
On the primer tool, do the shell holder thread in? I haven't tried unscrewing it yet, Hate to mess it up. The shell holder in it is marked F.
The powder scoop is a red one marked 203. Aren't the red scoops marked in cubic inches? If so this would be .205 CI, right?
I haven't tried running any cases through it to try the neck reamer. I find that part interesting.
Once I get a set of instructions, I'll size and ream some cases and measure before and after.
The bullet steatig stem seems to be a closer fit in this set than in the regular sets I have,
The reamer has very little to no side to side play in the bore it rides in.
I do have an arbor press to use it with so no whack a mole.
Thanks
Leo