Mixed up a batch of Ben's Red and feel the process went well. No scorching, darkening or burnt smells. Loaded and shot 40 rounds of 32 WS with it, testing Varget powder. under an RCBS 32-170-FN. No leading, a couple patches and bore was clean. Poor accuracy, but that could be (and likely is) a combination of other factors. My biggest issue is how soft and sticky it is. It gets all over my fingers and seems to need only the slightest excuse to come out of the lube grooves. I've read I can add 5 or so percent more beeswax to stiffen it up, but before I change what I have I wanted to know if that would be advisable. Is there a certain consistency I should be aiming for or this a do what you like scenario?