I started this build over a year ago when I submitted my sbr paperwork to the ATF. I bought the AO West Hurley 1991 Thompson [not a Kahr] a month or two before then. Took a year for my sbr paperwork to return. During that year I bought a 10.5 in finned bbl from GPC, bought a surplus 1928 stock and refinished it. After getting my papers I shipped the gun and bbl to a Thompson smith on the machinegunboards forum to swap out the bbls, reinstall the cutts comp, mill it for a 1928 stock slide, solid rivet the rear sight and mill it to make it easier to dismount. He had it done in two weeks. But I’m still waiting for the stock slide. It needed a correct case so this is what I finally found. As opposed to the traditional violin case I’m using a baritone ukulele faux alligator case. Hawaiian mafia. I’m planning on having two layers in the bottom rather than using the top. The bottom of the case will hold 3 thirty rd mags, the 1927 lower, buttstock and a handful of 1911 mags under the stock. Maybe a couple of vintage repro boxes of .45. I am using a 1/8 inch piece of aluminum for the next tier which will hold the upper half of the gun and an Auto Ordnance 1911. About have the bottom done.
Attachment 263698Attachment 263699