Load DataRepackboxTitan ReloadingMidSouth Shooters Supply
WidenersReloading EverythingRotoMetals2Inline Fabrication
Snyders Jerky Lee Precision
Results 1 to 3 of 3

Thread: how much heat for breech plug?

  1. #1
    Boolit Bub
    Join Date
    Mar 2016
    Posts
    35

    how much heat for breech plug?

    Have a short 1842 musket bbl. for a fun project. The tang is snapped off so I drilled a somewhat off center hole and tried an easy out with all the heat I dared. Presoak in Kroil. No avail. How far can I go? Get it red? Thanks for looking, Jaeger.

  2. #2
    Moderator Emeritus / Trusted loob groove dealer

    waksupi's Avatar
    Join Date
    Mar 2005
    Location
    Somers, Montana, a quaint little drinking village,with a severe hunting and fishing problem.
    Posts
    19,410
    I don't think I would go red. Blue is as hot as I have ever taken one. Soak it longer. Or cut off the plug, and re-breech it.
    The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
    John Taylor - "African Rifles and Cartridges"

    Forget everything you know about loading jacketed bullets. This is a whole new ball game!


  3. #3
    Boolit Bub
    Join Date
    Mar 2016
    Posts
    35
    Thank you Waksupi.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check