just got gifted 8lbs titewad from a loading room cleanout I shoot 44mag rifle 30/06 30-30 45-70 375H&H is there anything I can use this in besides 12 gauge? I would love to use it if I could? suggestion past experiences appreciated.
just got gifted 8lbs titewad from a loading room cleanout I shoot 44mag rifle 30/06 30-30 45-70 375H&H is there anything I can use this in besides 12 gauge? I would love to use it if I could? suggestion past experiences appreciated.
I've shot it in .45acp, worked fine but eventually found it was easier to just keep using the powder measure I have setup for Red Dot.
I loaded 100 rounds with it, had no issues at all. Still have most of a pound.
There is data out there for it, just have to do some work to find some of them.
I've shot it in .45acp, worked fine but eventually found it was easier to just keep using the powder measure I have setup for Red Dot.
I loaded 100 rounds with it, had no issues at all. Still have most of a pound.
There is data out there for it, just have to do some work to find some of them.
http://castboolits.gunloads.com/show...-not-Titegroup
You could probably use a small charge under a piece of 00 buck sized down to 310 in 30-30 or 30-06
https://r.tapatalk.com/shareLink/top...ink_source=app
Sent from my SM-N950U using Tapatalk
http://www.gmdr.com/lever/lowveldata.htm
Loads listed here also
Sent from my SM-N950U using Tapatalk
Can't speak as to the calibers that you listed. I've used it in .45 Colt and .38 special with good results.
“Let us endeavor so to live that when we come to die even the undertaker will be sorry.”
― Mark Twain
W8SOB
2.6 grains shot well in 38 spl wadcutter loads. 4.4 grains was a nice. 44 spl load with a Lee 200 grain Boolit.
_________________________________________________It's not that I can't spell: it is that I can't type.
I have used titewad like Bullseye in 3006 lite loads. I used 3.0 grains of it under a cast 113 grain soup can load .
also under the 90 grain cast LEE T L SWC.
It's a really fast shotgun powder.
You never know if there will be pressure spikes using more than 3 grains so I'm happy with the lite loads.
May try a lite load in .32 acp afterwhile.
Reportedly it works in .38 special and ..45 acp.
I found it to be about 10% faster than bullseye, by weight.
_________________________________________________It's not that I can't spell: it is that I can't type.
It is my favorite powder for .45. 4 grains and 200grn bullet is a sweet shooter.
It is easier to forgive than to dispose of a body.
I stopped using it due to the metering issues I was having progressive loading.
"It is better to die on your feet than to live on your knees" Looking for an RCBS Ammomaster and H&R shotgun barrels regardless of condition
7gr titewad in 30-30 and plain based 165 gr boolit. Great for plinking out to 50 yards.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |