Here is my complete package offer for making excellent 22 caliber bullets from both commercial jackets and 22lr brass.
I recommend using a Lee Classic Cast press with my BTSniper premium dies. I offer an improved version of the Lee Classic Cast press that I have modified specifically to handle the pressures of swaging. This press has modified linkages that produce over twice the leverage of the stock press and comes with a new threaded ram and auto eject set up.
Should the customer already have the Lee Classic Cast press all that is needed is my auto eject set up and the press will be good to go for use with my dies.
BTSniper Premium 22 cal Swage Die Kit
Derim die and base punch not shown in pic
For customer that already has the Lee press this kit includes everything listed below plus samples of each step of the process, 1/2oz. swage lube, instructions and excellent customer support.
$699.00 point form die (available in 7.5s or VLD 14s ogive)
$499.00 core seat die
$549.00 core bleed die
$225.00 derim die
$276.00 four threaded base punches
$249.00 eleven cavity core mold
$249.00 Auto eject for either Lee Classic or press with 1" ram
Two payments of $1373.00
Additional addons or upgrades. Add costs shown below to above package offered price.
BTSniper Improved Lee Swage Press
$225.00 add on
22mag/17hmr jackets for 22 cal jackets
$225.00 derim die
$69.00 derim die base punch
$69.00 push threw base punch
*requires 22lr derim die to draw down 22mag from 6mm diameter to 22 cal
$363.00 add on
Traditional 9 degree Boat tail
$250.00 Boat tail base punch for point form die
$100.00 upgrade to Boat tail core seat die
$350.00 add on
Rebated boat tail
$349.00 RBT base punch for point form die
$50.00 (upgrade)Traditional Boat tail core seat die starts the boat tail
$549.00 RBT core seat die finishes rebated boat tail
$948.00 add on
Standard reloading press options
Shell holder style base punch
$89.00 ea.
*same price as listed above for boat tail options
Auto Eject System for press with 1" ram
$225.00
These are the numbers, price and tooling required to form 22 cal bullets from various jacket materials. Notice some of the various kits have tooling that over laps and can be used with other kits should customer purchase more then one add on.
Feel free to contact me for additional details. Let me know your email address and I'll be happy to send copy of instruction manuals for potential customers to look over.
For order instructions or any questions feel free to contact me.
Brian Thurner
PO BOX 1783
Hood River, OR.
97031
BT_Sniper@hotmail.com
BTSNIPER llc.
541-436-4095