Hello everyone and best wishes for a Happy Easter.
I am writing to you to know what kind of paints you use to paint your boolits: epoxy or polyester?
I believe that epoxy paints are more resistant, and need a shorter baking time, even if at higher temperatures (200 ° C.)
I would also like to know if anyone uses the "fluidized bed painting" technique.
It is a little known and very simple technique: you need a container with a lid with a hole at the base or on one or more sides. The hole is closed by a filter that allows air to pass. A small amount of powder paint is placed on the filter. Then put a support inside the container with the boolits heated to about 200 ° C, close the lid and blow some air (just a common hairdryer!). The dust forms a cloud of paint particles which melts and sticks to them when in contact with hot boolits.
Unfortunately I don't know if I translated well into English!