I thought it was time to graduate from my thumbnail hardness tester,
The Lee tool arrived yesterday so figured out a way to set it up and test a few bullets to see how to work it. Still experimenting with a setup that will be easy to use.
This is how I have it for now.
I have a layer or 2 of scotch tape on the scope and a little clothespin on the scope to keep it from falling through the rcbs 45 colt sizer die and mounted in a turret for the LCT , so far I have just checked flat point bullets on the nose and am standing them up on one of the pass through shell holders from the app so I can turn the holder and slide the bullet to position under the scope.
This may evolve but seems to be working.