Loaded 150 32 H&H 100 gr rnfp Hi-tek and Red Dot on the LCT
Loaded 150 32 H&H 100 gr rnfp Hi-tek and Red Dot on the LCT
I built this
Sent from my iPhone using Tapatalk
Happiness is a warm .45
Started cleaning out the cosmoline of my latest purchase.
Racefiets
WAY COOL !!!!
What caliber is this one? Still 7.62x54R ?
https://en.wikipedia.org/wiki/Degtyaryov_machine_gun
Thank you
Mike
Last edited by skeettx; 02-24-2020 at 01:26 PM.
NRA Benefactor 2004 USAF RET 1971-95
Yes, all original as when it left the factory in 1944.
Finished de Flashing my 300BLK formed from my LC .223 mixed HStamps done professionally, as it was a LOT cheaper.
The mouths of the case were not smooth enough for me.
Next step to start Priming the 1000 cases.
Thx,
Barman54
Out
Cleaned out my ProMelt to get first casting session done in months. After some aggravation was able to get some MP 358-429s made up with deep HP for another member here.
Felt good to be at the table.
Loaded 500 45 acp with Hi-tek 200 gr rnfp on some BE-86 on the Lee ABLP .
I was able to walk to my shed and retrieve a battery charger, without carrying O2. Maybe took five minutes or so, then I had to repent and go sit down with the air hose back in my nostrils. To watch me try to breathe you'd think I was 97 or older with emphysema. But I made it!
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
No I buy these , they are similar to the Lee 200 but they work in all my autos @ 1.190 I also use them in 45 colt
In autos I use them in SA xds and xde and a 1911 a sig p220 and HK usp-c in revolver both cylinders of a Ruger 45 convertible . They shoot well in all for my use. Two of my shooting buddies use them in sig 1911 and remmington 1911 and a S&W shield also a Walther PPQ I think it is and 2 Glock 45s
I cast a 255 rnfp and a 230 and 200 tl 45s
This is the Co. I buy them from. My free lead supply dried up and I buy a lot of cast now.
https://summersenterprisesllc.com/pr...fp-500-ct-box/
Thanks onelight, that looks pretty close though it does look longer than the Lee. This one is .525" long while the Lee 200gr SWC IS .640"
Still haven't made it out to test fire these as I did something to my right shoulder and it is painful to try and raise my Metal Witness and hold it on target.
900 rounds of 223 today(day off). 15.5 grains W748 with a gas checked 70 grain boolit. Only 400 or so more to go.
Kmw1954 hope that shoulder gets better soon .
I would really like to shoot a witness in 45 I am a big fan of the CZ75 and it's clones but have never handled one in 45.
Sized up a couple hundred powder coated bullets I cast.
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Thank you again, See the Ortho Dr. on Monday.
I bought this Witness used and from what I've been able to find out is that it was imported in Dec 1992 and has been well taken care of. It has the typical CZ/Witness tight barrel and shoots like a dream. I fights reloads tremendously, and hates lead SWC's. I even have difficulties with .452" plated bullets though I found using R*P brass helps. Of all my pistols it is my pride and joy.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |