said id never buy another lee press but I will have to eat crow as soon as these are available. For the 80 bucks there advertised for on midsouth its worth the gamble and your not out much if there junk. Sure would speed up sizing pc bullets.
said id never buy another lee press but I will have to eat crow as soon as these are available. For the 80 bucks there advertised for on midsouth its worth the gamble and your not out much if there junk. Sure would speed up sizing pc bullets.
I'll have to stick firmly to "I'll never buy another Lee product." I have two sizer / lubricators one Star and one Magma and if I ever go the PC route I'll use them.
tomme boy I understand your point of view. Voicing a legitimate displeasure like you have done is fine and normal and mostly appreciated when there is a problem with a product. I'm just stating that at this point all we have is very sketchy information from Lee and a lot of speculation by end users that don't even have possession of this product yet. In my view even though I am a heavy Lee user it appears that Lee wants it's customers to do the Beta Testing. Which would be fine if they were honest and told people that's what they wanted from us.
This machine is a totally different concept of anything else on in the market, they are trying some things that have never been done before and for that I give them credit. So over the course of this development they have found some snags and things that just are not working out the way the wanted or intended, it happens. Then in this case everyone ordering this machine before it's release is basically becoming a Beta Tester.
For me I don't want to be a Beta Tester and will wait until it has been in use for a while and the bugs worked out. The only reason I would buy it would be to use it as a bullet sizer, everything else is already covered.
I got a shipping notice from Titan yesterday...
I understand totally. I was a beta tester for OMC on a $10K boat motor that blew up 6 times in 2 years. I ended up taking a loss and getting a Mercury and never looked back. Look up the OMC Ficht disaster and how it killed OMC and the whole company going bankrupt.
It seems that companies just put out garbage and let the people do the research for them. I have a LOT of Lee stuff. Some is very good. I guess I will just suck it up and wait to see what else I will have to buy just to get this to do what they promised.
I pre ordered mine on black Friday and have not gotten a shipping notice. I ordered the swagers though, so I might have to wait.
Sent from my iPhone using Tapatalk Pro
Mine will be here today! Unfortunately I was slow to order my Mr bullet feeder nose down conversion which won't be here until tomorrow. I'll just have to play with it in manual mode for a day.
I was at Titan Wednesday to get some handles and asked to see the new press. They said they just got it in but hadn't had time to even unpack it.
Bob
Si hostes visibilis, etiam tu
I use a RC to initially size machine gun brass and it can take a lot of force even with Imperial sizing wax. I doubt the Lee system will work well on that particular application.
I have a Dillon primer pocket swagger, and this tool should be faster, but swaging is a one time operation so not sure if I can justify it or the bench space for that one operation. It would be faster to swage primer pockets for 5.56 as a sperate operation on the 1050. That leaves .308 brass and I do not shoot much of it.
Like another poster, I have a Star so I can already handle bulk cast bullet sizing operations, but the new Lee would be good for someone without a Star who uses BLL, tumble lubing or PC.
For someone without better options, this new Lee tool has a good size market and addresses the needs of many reloaders. And like all tools, it has its limitations and is not for everyone.
It is sad that Lee seems to have rushed it to market. My old adage was "under promise and over deliver". Too many companies over promise and under deliver. Once the bugs are worked out this tool should be fine and offer a very good value. Just give it some time.
Don Verna
Well Titan is awesome. I emailed them and told them I bought all three swagers, but in different orders. I bought the press and 2 swagers in my fist order. Then I bought the last swager, bulge buster, and remaining shell holders that were not included with the deluxe kit in my second order.
I asked if they could ship the press now and ship the swager separately with my second order when the bulge buster and swager comes in. They said they would. This is their response:
Thank you for your email.
This product change by Lee Precision has affected many of our customers and we did not realize you had two orders pending.
On Order 191493, we had sent an email to you on 1/21.
Short version
You had ordered:
Item 91562 the LEE APP #4 PRIMER SWAGE TOOL and
Item 91563 the LEE APP #19 PRIMER SWAGE TOOL both for $27.49 each
We will make an adjustment to your order and issue a Refund for the difference.
We issued a refund for $18.73 to your credit card on 1/21
Order 192737, our email sent on 1/22
You had ordered:
Item 91561 the LEE APP #2 PRIMER SWAGE TOOL for $21.49
This Kit is an additional $14.76, please advise if you want the replacement kit, I should be able to re-charge your credit card. If you no longer want this product we will issue a refund for the Primer Swage Tool.
I will cancel the #2 Swage tool and issue a refund of $21.49 tomorrow morning.
On the next batch of APP Presses from Lee, we will send you yours with any other items we have been holding for you.
Then send the remaining balance (Lee APP Bulge Buster and APP Primer Swage Kit) when received from Lee.
Thank you for your business!
Sent from my Pixel 4 XL using Tapatalk
Last edited by jessdigs; 01-24-2020 at 10:08 PM.
Hey. I got my press today from titan. It’s smaller than you think. But very cool looking. I’ll post again when I’ve played
with it.
Sent from my iPhone using Tapatalk
Setting mine up now. It's smaller than I'd expected. Just have to drill 3 counter sunk holes in my inline fabrication quick change bottom plate and I'll be good to go. I fiddled with it a little and it's pretty easy to setup.
I test fed 10 bullets thru the feeder and it became quickly obvious this thing is useless without a bullet and case feeder. It's too fast and the tubes are way too short!
I have a pile of bullets ready to go for tomorrow when my nose down conversion arrives for my bullet feeder.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |