Heck I have some stuff I can add again. I have a few more of those 8-32 hex shanks to attach brass prep tool. Does anyone else have any interest in those?
Sent from my LM-G820 using Tapatalk
Heck I have some stuff I can add again. I have a few more of those 8-32 hex shanks to attach brass prep tool. Does anyone else have any interest in those?
Sent from my LM-G820 using Tapatalk
I thought about taking one Rp but I have a length of cleaning rod I use for such matters.
That's a pretty good idea as well.
Sent from my LM-G820 using Tapatalk
Who want's it? PM me your address.
sent today.
Inventoryon arrival:
B-Square “No gun smith” scope mount for Ruger 22 pistol with bull barrel
Volquartsen comp for Ruger 22 Pistol with bull barrel
Pachmayr grips for Ruger Red Hawk (DID NOT FIND)
Weatherby 270 Weatherby die set new
Lee 41 LC case trimmer pilot and shell holder
RCBS bench primer handle
RCBS 221 Rem die set no box (Repackaged in new Ziploc)
1 lithium ion rechargeable 123a battery and charger
Lyman #55 powder drop tubes - 4 pcs (Repackaged in new Ziploc)
Lyman TL JR 6 MM 2 die set (Repackaged in new Ziploc)
Red gun lock
20 pcs. 450 Marlin brass, Hornady head stamp
Uncle Mike's #36 IWB holster. Lightly used.
3- 5.56 repack ammo boxes
10x 45 ACP repack ammo boxes
AR carbine handguard w/heat shields (Note: Ruger comp & AR flash hider packed in here) (NO FLASH HIDER)
AR aluminum cocking handle found in box
Lee 6.5x284 case length gauge for trimmer
MTM digital scale; needs battery( watch style)
VA Scope mount for BP rifle NIB
5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
(Please one each to a delivery as these are handy)
9 ea Starrett Decimal tap&drill cards (ONLY 8)
9 ea, Metric tap/drill cards (ONLY 6)
(Please one each to a delivery as these are handy)
Ironsighter mount for Remington 760-742 rifles
1911 Spur grip safety from Springfield Armory 45
20 ea-.321 Commercial cast bullets @ 165 gr
20-170 gr .321 cast bullets sized w/ gas check,
53 pieces 6.8 SPC once fired
Protech holster for Glock 23,30,36 (New)
Viking Tactics Quick adjust sling MK I (New)
Uncle Mikes #13 Large scoped revolver holster
Protech Large revolver holster
Lee 300 Savage case trimmer pilot and shell holder
AR Riser
2 US Constitution booklets
50 5.7x28 cases; once fired (do not clean - lacquer coating)
10 454 Casull cases; once fired (4 nickle, 6 brass)
50 50 AE cases; once fired (nickle)
20 308 cases; once fired
20 300 blk cases; new Gemtech
15 45 Cowboy cases; new Starline (rimmed 45 ACP)
50 22 cal. hornady gas checks
50 30 cal. hornady gas checks
10 32 cal. lead ball (.315) (for slugging?)
10 36 cal. lead ball (.375) (for slugging?)
10 50 cal. lead ball (.490) (for slugging?)
UNLISTED
Green AR follower
2 Starrett catalogs
Starrett notepad with fractions to decimals to millimeters in back
Partial car cigarette lighter power chord
WHAT I TOOK:
Lee 41 LC case trimmer pilot and shell holder (The whole reason I wanted the box)
RCBS 221 Rem die set no box (left the rings)
10 pcs. 454 Casull cases; once fired (4 nickle, 6 brass)
20 pcs. 450 Marlin brass, Hornady head stamp
MTM digital scale; needs battery( watch style)
1 Starrett Decimal tap&drill cards
1 Metric tap/drill cards
1911 Spur grip safety from Springfield Armory 45
53 pieces 6.8 SPC once fired
Protech Large revolver holster
Lee 300 Savage case trimmer pilot and shell holder
Lee 6.5x284 case length gauge for trimmer
1 US Constitution booklet
50 5.7x28 cases; once fired (do not clean - lacquer coating)
50 50 AE cases; once fired (nickle)
20 300 AAC Blackout cases; new Gemtech
15 45 Cowboy cases; new Starline (rimmed 45 ACP)
50 22 cal. hornady gas checks
1- 5.56 repack ammo boxes
5x 45 ACP repack ammo boxes
WHAT I PUT IN
I like the idea of roundballs for slugging too. It sucks trying to pound a 36 cal roundball through a Mosin Nagant.
10X Hornady #4 Buckshot pellets .240"
10X Hornady 44 cal roundballs .454"
In case someone wants to test Pat Marlin's checks vs Hornady or Gator's or aluminum vs copper I threw in some homemade checks.
100X .011 Al Homemade 30 cal gas checks
100X .011 Cu Homemade 30 cal gas checks
42X .011 AL Homemade 44 cal gas checks
43X 44 caliber Hornady Gas checks
4X SMLE 303 Chargers
5X SKS Chargers
1X 8mm Mauser Charger
2X 223 AR mag spoons
20x 223 AR mag chargers
LEE 10mm case length gauge and shellholder
LEE 357 SIG case length gauge and shellholder
3X AR-15 3 mag pouches. 1 with one divider, 1 with both dividers, one with no dividers
3X Lee Die lock rings,I personally love these and keep a handful around for other die brands.
Zippo lighter, no guts but a good hinge I had for a spare. Don't carry it in a pocket so I don't expect to wear the hinge out on my other one just smoking moulds when I cast. Don't smoke kids, unless you're smoking mould cavities.
AK blank firing adapter
H&K G3 mag
Herter's wad column gauge
Small bottle of Bull Plate
SPG lube
No4 Mk1 bolt head, #1,stripped.
Small magazine, I think possibly a PA-63
The two rings I took off the Fireball dies
RCBS 41 Magnum dies, old type with decapper on mouth expander die
The tiny craft baggies I had left over. Not going to count 'em. Would be good for taking a few of the slugging balls when you come across a new rifle.
3 unknown trimmer pilots. All I know is they came with my used Forster, but the shanks are too small. If you have another brand could you try them even if you don't need them to identify what they fit.
I hope to fit all that in the box, I have to see if the have any large flat rate boxes at Harlan or I'll have to order some. Thought I had a few but only small, medium and tyvek bags. You may notice took a bunch of brass and didn't put any back and may think I'm a brass hog (you'd be right). I only found 2 pieces of 7mm-08 and 1 300 Weatherby. I know I have a box of brass labeled "Brass I can't use (YET!) somewhere but I need to find it. I've also got some brass from things I don't have anymore. Some of the other guys were talking about starting a brass and bullet "I could use it box" . I'm going to PM with them and see if we can get that started.
PACKED UP AND READY TO SHIP
Inventory:
B-Square “No gun smith” scope mount for Ruger 22 pistol with bull barrel
Volquartsen comp for Ruger 22 Pistol with bull barrel
Weatherby 270 Weatherby die set new
RCBS bench primer handle
1 lithium ion rechargeable 123a battery and charger
Lyman #55 powder drop tubes - 4 pcs (Repackaged in new Ziploc)
Lyman TL JR 6 MM 2 die set (In the box with 270 dies to save space)
Red gun lock
Uncle Mike's #36 IWB holster. Lightly used.
2- 5.56 repack ammo boxes
5x 45 ACP repack ammo boxes
AR carbine handguard w/heat shields (Note: Ruger comp packed in here)
AR aluminum cocking
VA Scope mount for BP rifle NIB
5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
(Please one each to a delivery as these are handy)
7 ea Starrett Decimal tap&drill cards
5 ea, Metric tap/drill cards
(Please one each to a delivery as these are handy)
Ironsighter mount for Remington 760-742 rifles
20 ea-.321 Commercial cast bullets @ 165 gr
20-170 gr .321 cast bullets sized w/ gas check,
Protech holster for Glock 23,30,36 (New)
Viking Tactics Quick adjust sling MK I (New)
Uncle Mikes #13 Large scoped revolver holster
AR Riser
1 US Constitution booklets
20 308 cases; once fired
50 30 cal. hornady gas checks
100X .011 Al Homemade 30 cal gas checks
100X .011 Cu Homemade 30 cal gas checks
42X .011 AL Homemade 44 cal gas checks
43X 44 caliber Hornady Gas checks
10X 32 cal. lead ball (.315) (for slugging?)
10X 36 cal. lead ball (.375) (for slugging?)
10X 50 cal. lead ball (.490) (for slugging?)
10X Hornady #4 Buckshot pellets (.240")
10X 44 cal roundballs (.454") (Roundballs stuffed in AR handguard)
Green AR follower
2 Starrett catalogs
Starrett notepad with fractions to decimals to millimeters in back
Partial car cigarette lighter power adapter
4X SMLE 303 Chargers
5X SKS Chargers
1X 8mm Mauser Charger (in the 41 die box)
2X 223 AR mag spoons
20x 223 AR mag chargers
LEE 10mm case length gauge and shellholder
LEE 357 SIG case length gauge and shellholder
3X AR-15 3 mag pouches. 1 with one divider, 1 with both dividers, one with no dividers
3X Lee Die lock rings.
Zippo lighter, no guts but a good hinge I had for a spare.
AK blank firing adapter
H&K G3 mag
Herter's wad column gauge
Small bottle of Bull Plate
SPG lube
No4 Mk1 bolt head, #1,stripped.(in the 41 die box)
Small magazine, I think possibly a PA-63(in the 41 die box)
The two rings I took off the Fireball dies (in the 41 die box)
RCBS 41 Magnum dies, old type with decapper on mouth expander die.
The tiny craft baggies.
3 unknown trimmer pilots.(in the 41 die box)
1 Sling swivel (in the 41 die box)
With all the copying and pasting I hope I have the inventory right.
Last edited by 0verkill; 10-19-2019 at 03:42 PM. Reason: Ready to ship
I'd like to give this another shot. I found another battery for the 123a charger and I have a couple things to add and could use a couple things.
Sent from my SM-G973U using Tapatalk
Dignified? I signed up for brave and courageous, not dignified!
Overkill please post an update on the I could use it box. Jake McCracken said he would take it.
Thanks
1911sw45
According to the Post Office delivery notifications, it should be in my PO Box when I stop on my way home from work.
Sent from my SM-G973U using Tapatalk
Dignified? I signed up for brave and courageous, not dignified!
No problem was just checking the progress.
Jake McCracken update on the I could use it box please.
1911sw45
Box is ready to move along! Sorry for the delay, life happened...
What i took:
3 - lee die lock rings
2 - die rings from fireball dies
1 - each 45 and 5.56 repack box to try out
What I added:
8pcs 450 bushmaster hornaday brass (found at the range looks once fired)
glenfield 4x15 .22 scope
barska 4x15 .22 scope
1 block of gulfwax parafin
1 more 123a rechargable battery
50 wheel weight cast 230gr Lee TL RN 45 (need lubed or powder coated)
Inventory:
B-Square “No gun smith” scope mount for Ruger 22 pistol with bull barrel
Volquartsen comp for Ruger 22 Pistol with bull barrel
Weatherby 270 Weatherby die set new
RCBS bench primer handle
2 lithium ion rechargeable 123a battery and charger
Lyman #55 powder drop tubes - 4 pcs (Repackaged in new Ziploc)
Lyman TL JR 6 MM 2 die set (In the box with 270 dies to save space)
Red gun lock
Uncle Mike's #36 IWB holster. Lightly used.
1- 5.56 repack ammo boxes
4x 45 ACP repack ammo boxes
AR carbine handguard w/heat shields (Note: Ruger comp packed in here)
AR aluminum cocking
VA Scope mount for BP rifle NIB
5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
(Please one each to a delivery as these are handy)
7 ea Starrett Decimal tap&drill cards
5 ea, Metric tap/drill cards
(Please one each to a delivery as these are handy)
Ironsighter mount for Remington 760-742 rifles
20 ea-.321 Commercial cast bullets @ 165 gr
20-170 gr .321 cast bullets sized w/ gas check,
Protech holster for Glock 23,30,36 (New)
Viking Tactics Quick adjust sling MK I (New)
Uncle Mikes #13 Large scoped revolver holster
AR Riser
1 US Constitution booklets
20 308 cases; once fired
50 30 cal. hornady gas checks
100X .011 Al Homemade 30 cal gas checks
100X .011 Cu Homemade 30 cal gas checks
42X .011 AL Homemade 44 cal gas checks
43X 44 caliber Hornady Gas checks
10X 32 cal. lead ball (.315) (for slugging?)
10X 36 cal. lead ball (.375) (for slugging?)
10X 50 cal. lead ball (.490) (for slugging?)
10X Hornady #4 Buckshot pellets (.240")
10X 44 cal roundballs (.454") (Roundballs stuffed in AR handguard)
Green AR follower
2 Starrett catalogs
Starrett notepad with fractions to decimals to millimeters in back
Partial car cigarette lighter power adapter
4X SMLE 303 Chargers
5X SKS Chargers
1X 8mm Mauser Charger (in the 41 die box)
2X 223 AR mag spoons
20x 223 AR mag chargers
LEE 10mm case length gauge and shellholder
LEE 357 SIG case length gauge and shellholder
3X AR-15 3 mag pouches. 1 with one divider, 1 with both dividers, one with no dividers
Zippo lighter, no guts but a good hinge I had for a spare.
AK blank firing adapter
H&K G3 mag
Herter's wad column gauge
Small bottle of Bull Plate
SPG lube
No4 Mk1 bolt head, #1,stripped.(in the 41 die box)
Small magazine, I think possibly a PA-63(in the 41 die box)
RCBS 41 Magnum dies, old type with decapper on mouth expander die.
The tiny craft baggies.
3 unknown trimmer pilots.(in the 41 die box)
1 Sling swivel (in the 41 die box)
8pcs 450 bushmaster hornaday brass
glenfield 4x15 .22 scope
barska 4x15 .22 scope
1 block of gulfwax parafin
50 wheel weight cast 230gr Lee TL RN 45 (need lubed or powder coated)
With all the copying and pasting I also hope I have the inventory right.
Sent from my Samsung Phone using Tapatalk
Dignified? I signed up for brave and courageous, not dignified!
So are you guys liking those repack boxes?
Sent from my LM-G820 using Tapatalk
Rp,
Thanks on the repacks, I didn't need any 45s, got a box full of the old GI cardboards. But the others are rather handy, the 32 & 40S&W work fine. The fold up of the 223 is a little odd, but they hold ammo properly, so who cares?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |