I am having a time putting a Star Firestar, .40 back together. The owner bought it to me to have a new extractor put in, which I was luck to find. When I started to put it back together, lined the marks up on the slide and frame, to put the slide release/retaining pin back in, it is a struggle, and when I do get it in, the slide does not want to go forward, and the recoil spring guide wants to stick out some thru the end of the slide. I have detail cleaned, and replaced a few parts on probably 30 of these in the past 35+ years of gunsmithing, and never had a hiccup. I can put the slide on without the barrel/recoil spring and it just falls together. I am thinking the captured recoil spring/guide comb is not staying where it needs to when reassembled, is dropping down. Anyone have any feedback or similar issues with one of these. I know it just has to be something simple, but I am worn out and feeling stupid for not figuring this out, all feedback appreciated.