Preparing to be a first time Paper Patcher, in the process of compiling the data and necessary tools for the operation. Guide me along to be sure I am doing this correctly.
The groves on the 35 Whelen barrel measure .3585", taken off the pure lead slug I pushed down the bore. The lands embossed on the slug, when averaged out, is .350 across, some a bit more, some a tad less. (.3485" up to .351") My inclination after studying this task is to order a sizing die from one of the fine venders on this site for my Lyman 450 lube/sizer at .352". After casting soft 358318 boolits size them down to .352". Wrap twice with .002" paper and then resize with my .360" sizing die and a light coating of appropriate lube.
Am I on the right track? Your inputs are appreciated.
Christopher