I have one of the old blue colored Pacific Deluxe case trimmers with a dull cutter. Does anybody know how these cutters come off the shaft and if the new "Cam-Lock" cutters, which I can get, fit these older Pacific trimmers?
I have one of the old blue colored Pacific Deluxe case trimmers with a dull cutter. Does anybody know how these cutters come off the shaft and if the new "Cam-Lock" cutters, which I can get, fit these older Pacific trimmers?
I don't know about the new Cam Lock trimmers.
However, your trimmer has the cutter and shaft as a single piece. To remove it take out the tiny set screw on the handle and remove the large E-Clip and slide the shaft forward. The spring clip on the cutter end serves as a stop to keep the shaft from coming out backwards, remove it only if you like living on the edge.
It is possible to use a lathe and modify a Forster shaft to fit. It would have to be cut to length and turned for the handle and E-Clip to fit.
Take the shaft out and take it to the store that has a Cam Lock in stock and visually compare the two.
Thanks for the info PRESSMAN, I appreciate it. I am going to take dimensions of the shaft in mine and use it as an excuse to stop by my local reloading shop that has one on display. Of course along with my steal machinist rule and micrometer.
hate to resurrect an old thread... but did you find out if the cutter/shaft are interchangeable?
I'd like to know that too. I suspect that they are not, but there was a Hornady model that looked like a ringer. I had some semblance of luck sharpening mine with a stone. I called Pacific several years ago and was told they had no replacement cutters.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |