We have been having problems with squirrels chewing off wires on our cars here on the farm, and I want to develop a "squirrel load" for a Swedish Mauser M38 carbine. I have a bag of new Winchester brass I bought several years ago along with a bunch of projectiles I cast using a Lyman 266469 RNGC mold of 140 grains. These have not been sized or lubed yet, which I will do using a LAM-II with 2500+ lube. Generally I use Winchester Large Rifle Primers since I bought a case of them. So, does anybody have some suggested loads for this sort of application? Otherwise I will have to start with whats presented in the Lyman Cast Bullet Manuals #3 or #4.