Is there anyone who made one????
I find lighter and heaver.
My Camp Carbine likes 115gr jacket.
So I'm thinking a 115gr cast would work just as well.
Is there anyone who made one????
I find lighter and heaver.
My Camp Carbine likes 115gr jacket.
So I'm thinking a 115gr cast would work just as well.
I have an old Lee mold that casts a 9mm at 115grains. It is a dual cavity and has the no 90307. This no doesn't show up in any Lee catalogue as 9mm instead it lists it as a 30 cal 230 grain .Ive had this mold for years and produced some accurate loads using 4.1 grains w231
The Bird of Time has but a little way
To fly-and Lo! the bird is on the wing
I found one on the RCBS site, and Accurate Molds has several designs.
I'm using the Accurate 35-115Y. It's for HT or PC. I'm doing the HT and there's a bit of a learning curve plus things better be just right with the barrel. Casts great, feeds great
Last edited by jsizemore; 07-21-2019 at 08:31 AM.
RCBS. 115 grn round nose. I have one and I like it.
Long, Wide, Deep, and Without Hesitation!
I just sold a lyman 115 gr rn 358072 . Was for 38 and 38super i believe but i used it for 9mm and 38. Just didn't use it much. Keeping ebay but they don't come up often.
There was a group buy for a re-run of a MP 9mm 115gr. RN (BB or FB) cast size .359. That GB closed on 3/11/19 & Mihec stated @ closing that he had some over-runs. He is a member of this forum: PM him if interested. I have this mold (8 cav. alum. in BB) & it is a great mold. With 50/50+1.5 they weigh 119.2-119.3. With straight WW they should be close to 115grs.
I use an H&G #115 and #7 for a slightly heaver 9mm. You might take a look at the Saeco #922.
Lyman made one. I had it. Cute lil 115g swc
I still have some cast as I cast about 500 before I sold the mold. Sorry I do not remember the number.
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |