Hi hey anybody using a MP 130 SWC 9mm, it's the alum. 8 cav. How's the accuracy, feeding, how's the mold working for ya? I'm using Glock 19s and maybe a RIA.
Hi hey anybody using a MP 130 SWC 9mm, it's the alum. 8 cav. How's the accuracy, feeding, how's the mold working for ya? I'm using Glock 19s and maybe a RIA.
If we are talking about the same boolit, mine is a H&G#275 clone by MP, my mold is a brass 6 cavity.
This boolit is very accurate and cut's a very nice sharp hole in the target, just like the H&G#68 in the 45.
I had some problems in the beginning since my pistol had a short chamber, so the boolits had to be seated too deep to fully chamber. This caused the base of the boolit to be swaged down by the tapered 9mm case.
Once I reamed the chamber to accept a longer boolit, the problem was solved and now it is my favorite 9mm boolit.
His aluminum molds are very nice, and will produce the same quality castings.
good to hear--it is the H&G 275 clone. thanks
Mine has worked great in glocks and my cz Shadow 2s
I think you are also talking about the NOE 358-128. I personally prefer the 358-129 for powder coating, which is bevel based. Never had a feed problem in any 9mm and 25 yard accuracy is quite good.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |