anyone using the corbin core mould? i am curious what melting pot you guys are using that allows clearance under this or are you dipping and pouring?
thanks
anyone using the corbin core mould? i am curious what melting pot you guys are using that allows clearance under this or are you dipping and pouring?
thanks
I use the Core Mold. Works fine, but I use a ladle to fill the mold. It's set up to be bench mounted or mounted on a stand, not something easily handled by a bottom pour pot.
what he said. I have actually gone to custom core molds that are more like a standard mold just so I could use my bottom pour pot.
if you are ever being chased by a taxidermist, don't play dead
I also use a ladle to pour cores in my Corbin core mold.
some came from btsniper and some came from noe, just tell them the size and weight you want.
if you are ever being chased by a taxidermist, don't play dead
I use a lee 20# pot, I removed the base turned the unit around put it back on and clamped to the edge of the bench, all the room you need.
I use a RCBS pot, my corbin mold fits under it.
I have a lee pot set up like greg in va does. But mine is on a slide to move my corbin mold in and out Will try to post a few pics when i get home in a few days
I use a Corbin core mold and a Lee 20-4 furnace and just use the dipper to fill it.
Don't follow me, I'm lost too!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |