Attachment 234866
Ranch Dog 9mm 135s
Left: One of RanchDog's original Lee moulds
Right: Recently obtained Arsenal Mould, plain base (very nice mould, btw)
Both with Smoke's clear.
Attachment 234866
Ranch Dog 9mm 135s
Left: One of RanchDog's original Lee moulds
Right: Recently obtained Arsenal Mould, plain base (very nice mould, btw)
Both with Smoke's clear.
It ain't rocket science, it's boolit science.
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
.358 - 310gr coated in Smoke's John Deere Green
Cast in an Accurate Molds 34-310Z, Powdercoated, then run up into a BTSniper .358 Point Form Swaging Die with a .250 Flat Meplat or Hollow Point pin. When loaded in a .357 Maximum using VV Tin Star powder and fired in a suppressed TC Contender it is really quiet.
Alcohol Inventory Reduction Specialist (Journeyman Level)
450 bushmaster's coated with Smokes clear and blue tumble coated using his air soft BBs...
The blue wasn't cooperating the other day so I switched to the clear because it always goes on even and smooth with only a couple swirls and with the quicker clear PC grabbing onto my boolits causes less dings and scratches. I see one of my clears caught the edge when I seated it. I'll use that one for a fouler.
Last edited by Tripplebeards; 02-02-2019 at 01:47 AM.
cwlongshot...I can't see the purple in this color...would have sworn it was B & W.
Boy I know about 'non-repeatable' colors...once, I got this root beer kinda clear color mixing red, black and clear but have never been able to repeat it again...
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
Eastwood "Copper Penny" https://www.eastwood.com/eastwood-co...ny-powder.html
Finally something that looks like a copper coating...
This is a winchester 30 luger staynless (L) 313429 with 2 coats Eastwood's Copper Penny (M) NOE 314-118 with 1 coat Copper Penny (tumble application)
1 coat copper penny on Lee 314 90 grain SWC, NOE 118 RF, uncoated Win Staynless, 2 x (1 coat) copper penny on Win Staynless, Rem UMC 30 Luger plated round after much handling....
-Mike
Looking good Mike. I've been on the lookout for a good 30 Luger mold. That one looks like it would be great.
Here is a little blend that I'm calling Grape Bubble Gum. This is a mix of Smoke's Traffic Purple and Jet Black. This is the first colors I've blended that had a smooth color distribution. Nicely blended. H&G 50 and RCBS 38-150-SWC.
This one turned out kinda cool. I'm calling it Cherry Cola. Trying to use up some HF Red, so I mixed it in with some Jet Black. The blotchy color mix makes it look fizzy. This is an LBT 402-200-WFNGC.
Last edited by Taterhead; 02-04-2019 at 04:07 PM.
Smokes clear on devastators and polyurethane on a turtle foot.
.44 Mag from Lee 429-200-RF 6-cav mold, powder coated with Harbor Freight Red in a Walmart toaster oven at 275 degrees F for 15 minutes per Elvis Ammo.
Designed for Cowboy Action in an 1894 Marlin rifle at about 800 fps.
+/- 200 grain bullet, powder coated, sized to .430 using Lee push-through sizer, 6 grains of Trail Boss.
Smokes clear and traffic blue on 240 grain lee HP SWC and some 180 gr XTPs loaded with trail boss for my 44 mag titanium nite guard so I can pull the trigger without braking my knuckles.
Here are some I made just before Christmas.
Sent from my SAMSUNG-SM-G891A using Tapatalk
32-170-fn Yellow-grey swirl, sift, dump, bake
An afternoon's work.
Attachment 236423
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |