Mine arrived all the way over here in Australia this morning, thanks Smoke.
I did some .44 cal bullets tonight and they came out ok. The color is a bit splotchy in places but the overall coverage is as good as i get with the clear They do look slightly metallic from a distance so that's nice.
I was using a new type of container that i have not used before so i can't be sure if that is the reason for the splotchy coverage. I'll have to eat a kilogram (2+ pounds) of yogurt to get the same container that has been working so well for me with the clear.
What would happen if used the same container and BB's that i have been using with the clear? Are they compatible.
I'll take some pics when i have better light tomorrow.
What would happen if used the same container and BB's that i have been using with the clear? Are they compatible.
it would work .. Clear to another color would be fine .. going from another color to clear you would probably see a little of the first color in the clear finished bullets
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
I got my translucent copper today and tried it out. After a few small test batches, I got some that are a more consistent color. It definitely covers differently than the blue I've been using. I completely changed my application method and the amount of powder I use. I'm going to try some more tomorrow but I'm fairly happy with the results I'm starting to get now.
For some reason, this color is really hard to get a good picture of. This is with no flash under the florescent lights in the garage. It looks better in person though.
This color will not and is not intended to produce a solid opaque color. The beauty in this is the multi color hues it produces simulating the copper jacket multi hues.
As long as you see shiny finish the clear base coat is there and bullet is protected
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
SharuLady sent me this .. she was having problems posting the pics and I offered to post for her
Title : Testing 2 translucent copper colors
Hi, Sorry for the pics, as I am not real good with pics. This is just a small sampling.
While doing this I decided to do a little experimenting as well.
I did some with 2 coats of Smoke's (These turned out great). Then some with 2 coats of Eastwood's Copper Penny (these turned out ok but not as nice as with Smoke's). Pic 1 P1010008_2 & Pic 2 P1010009_1
Here a some pics I took with Smoke's Translucent & Eastwood's Copper Penny ( had only purchased 8 oz. of the copper Penny), then did a 2nd coat, first with Copper Penny the a 2nd coat of Smoke's Translucent (did pretty good). Pic 3 P1010010_1
Then I reversed them with Smoke's 1st coat the 2nd coat of Copper Penny ( this did pretty good also). Pic 4 P1010011_2
While I was at it I also did some with Eastwood's Extreme Chrome (really like this). Pic 5 P1010012_2
I also tried some of Smoke's Harvest Gold pc. Was hoping for a more true gold color but it isn't.
It covers ok (a little thin) but would look better with 2 coats. It turns out like a buff color.
It's not even close to the Harvest Gold you used to see on stoves & refrigerators in the past.
So my search will have to continue for a more True Gold color. Pic 6 P1010014_2
Smoke's Translucent copper does good with 1 coat , but even better with 2 coats (darker copper look).
Eastwood's Copper Penny is lighter than Smoke's & even with a 2nd coat of Copper Penny it still is light (slight improvement).
It is my humble opinion that Smoke's is the best of the Two (2) types of Translucent Copper that I tried.
SharuLady
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
Hi,
TYVM for your assistance on getting this uploaded to the forum Smoke4320!!!!
It is much appreciated!
I'm still getting caught up after the storm, and still don't have solid internet, but I had coated these before we lost power, but hadn't had a chance to get a photo uploaded. On my monitor the color is accurately portrayed. They look to me like a copper wash more than plating or a jacket, but from a few feet away, they look more like copper than lead.
These are essentially pure lead, and the copper powder applied a few hours after they were cool, before the lead could oxidize. This is a single coat of powder tumbled without BB's and dumped on a textured silicone baking mat. 400 degrees in a convection toaster oven for 20 minutes from cold (the color flows at between 5 and 6 minutes, so about 14-15 minutes cure time.)
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I got my powder in today and tried it on a small batch. In one picture, it has two bullets side by side. One was coated once. The other coated twice. The smash test was on a single coating. I tried single coats at 400degrees for 17 minutes and 300 degrees for 25 minutes. There were a few other trials. None produced any discernible difference.
Iron369. Something is wrong. No way should 1 coat look like your picture.
Causes could be ..
Not shaking hard enough or long enough
Wrong plastic bowl. MUST be #5 in a triangle
Wrong bbs
Contaminated in some way
If you still have issues call me and we can walk thru your process
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
I bought the bb’s from you. I may have not shaken long enough. it was definitely a #5 bowl. Even though the color is not as deep as the one with two coats, it is coated completely. I’m really new to powder coating bullets, but I did industry powder coating for several years. The coating looked pretty heavy as a dry powder.
Second batch. One coat. Picture shows coated and uncoated.
Just got my Translucent Copper in the mail today! Ordered late last week! How come Amazon Prime can't do that?
Thanks Smoke now I have to cast more boolits to try it on.
Those who choose violence as a first option are typically confronted by somebody else using violence as a last resort.
Live a good, honorable life. Then when you get older and think back, you’ll enjoy it a second time.
Do not confuse my being polite for weakness.
Using MX Linux 21
From the free state of Idaho
Iron369
Your second batch look much better
Looks like you got it now
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
Those who choose violence as a first option are typically confronted by somebody else using violence as a last resort.
Live a good, honorable life. Then when you get older and think back, you’ll enjoy it a second time.
Do not confuse my being polite for weakness.
Using MX Linux 21
From the free state of Idaho
I finally coated some with this powder and they look great and passed the smash test!!
Thanks again Smoke
"Yes or no will almost always suffice as the answer"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |