Hey guys,
I´m transforming .308 Winchester cases into 6.5 Creedmoor.
After the swagging process I want to do some fire forming to print out the edges.
Therefore I want to try a pet load with N110 and some 140gr. copper platted bullets from H&N (Germany).
The problem is, H&N says that you shall not go over 1400fps, what would mean I had to go with about 12gr. of N110.
This would fill my case only for round about 30%.
Quickload says with 12gr. of N110:
1439fps
11983psi
I never had such a reduced load.
Will this be safe?