Does anyone on the board here make threaded push through sizers like lee, but in different sizes then lee? I want one for 270 Win. (.278)
|
   
   
|
|
Does anyone on the board here make threaded push through sizers like lee, but in different sizes then lee? I want one for 270 Win. (.278)
PM Buckshot
See if Buckshot will make you a 7/8 X 14 adapter with the inside hollowed out to .700".
Then have him make a shellholder with a center threaded for 5/16" bolts. Then bolts can be turned to rams of close to the appropriate size and regular Lyman and RCBS dies can be used as push through dies.
Crazy Mark, myself and several others have been using this concept on our single stage presses for years and it works well./beagle
diplomacy is being able to say, "nice doggie" until you find a big rock.....
Lee will make you one any size you want. Contact them.
Milt Farrow "I'm not sure what it is, but it uses a lot of ammo."
Buckshot PMd he could do it for me. The RCBS dies have a enlarged area in the middle of them.
............RCBS dies have a radial lube groove passing through the 4 lube holes. This is just for better distribution since they DO only have the 4 holes. As the die is at full reduction before this groove I doubt it would present any problem in using it as a push through. The main difference between the Lee push throughs and using Lyman or RCBS dies as push throughs, is that the Lee has only a narrow band (maybe 0.100" wide) that does the sizing. The RCBS/Lymans will have a bit over an inch of parallel bore.Originally Posted by NSP64
The RCBS dies have a enlarged area in the middle of them.
...............Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
I would love one of these do-dads also. What are you charging Buckshot?
Founder of the Single Shot section.
A government big enough to give you everything you want is big enough to take everything you have.
8 in the 10 ring, then I get a PING. Love my Garand.
..........For what? A push through size die or the adaptor to use regular lube-size dies, or? Just PM me and we can go from there.
...............Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote