I'm bored at work, this may be a benefit of self employment, or a disadvantage depending on how you look at it. Anyways I thought I might post a few picture of my bottom pour ingot maker Flaming Bertha. She holds about 10 gallons of water. which comes out to around 1100lbs of lead if she were to be filled 3 inches from the top. I don't fill her that much do to safety concerns. Construction is 3/8 plate and pipe, with large legs that can be bolted down and a 12 inch propane burner. The plate for bolting to the floor is repeated underneath the container, so she is well supported on the edges with over 1/2 inch of steel. She sure is a hot number.