Can you shoot 3006 without gas checks? I've never shot cast boolits in a rifle and was wondering if I could save the $$$ gas checks would cost.
Kevin
Can you shoot 3006 without gas checks? I've never shot cast boolits in a rifle and was wondering if I could save the $$$ gas checks would cost.
Kevin
Of course you can. Use a plain base mold and shoot away. At a guess you would essentially be turning the 30-06 into a functional 30-30. By that I mean loading it to shoot at 30-30 velocities.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I shoot both .22 and 6mm bullets that are from gas check molds (RCBS)without the gas check and can't tell any difference from those with gas checks.
Thanks for the info. I was thinking about 150 or 170 grain for plinking. At what point do I need gas checks?
Kevin
At about 1500 you will probably need them
Size them .301 and patch them back up. Load like jacketed and go shooting!
Depends a lot on your alloy, boolit fit, etc.,etc.
I run some to about 1800 with no prblems and others say they get more.
The more you experiment, the more you get to shoot.![]()
grit yer teeth an pull the trigger
Greetings The experimenting part is the best. Just start out around 1600 fps without GC and move up about 100 fps with 3 cartriges.. It depends on your barrel.. lube.. powder.. mix.. bullet style.. and how you squint through your shooting eye. Water dropped linetype can get moving fast... 40-1 lead can plod along rather respecfully. But every barrel is PEEEE-QUUUU-LIAR so remember not to try to interchange Max loads without GC from one 30 cal to another. I did once !
But every barrel is PEEEE-QUUUU-LIAR so remember not to try to interchange Max loads without GC from one 30 cal to another. I did once !
So what happened? Did you get to see the silver stream from a different perspective?![]()
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |