I press calibrate, then when it’s asking for 0 and with nothing on the scale and it’s stable I press calibrate again. Then it asks for 50gram weight, I lay it in the scale and wait for it to be stable, press the calibrate button again and it beeps and gives me an error. (I have a video but don’t know how to post it, I can email if anybody is interested in helping me).
For interest sakes, even though scale is not calibrated it will measure the 50gram weight as 62.09grams (958.2grains). Should be more like 771.62grains. Obviously this isn’t acceptable.
I called RCBS and they only warranty this unit for 1 year but mine is older, and they only offered this for advise:That didn’t work... do any of you have any idea how to fix this? It seems that years past RCBS warranty would replace the unit but I sure didn’t get that option. Kind of sickened at the thought at buying a new one.Try taking the scale and dispenser apart and blow some canned air like you would use to clean your keyboard into the connection ports. Also a couple shots under the platen to make sure there is no powder on the load cell. Also take a bounce or downey sheet and wipe the entire unit down with it to remove any static electricity. Try loosening the feet on the bottom of that unit and tighten them back up so that they just touch the bottom of that unit. Those units have a 1 year warranty on them and we will replace them if they are under warranty at no charge to you. I'm sorry but we do not work on those units.
Thanks!