RCBS has the cherry to cut a mold for the Italian Vetterli, and will not make any molds with it because it doesn't have a part number.
A couple of years ago I tried to get RCBS to make me a mold and they would not.
RCBS has the cherry to cut a mold for the Italian Vetterli, and will not make any molds with it because it doesn't have a part number.
A couple of years ago I tried to get RCBS to make me a mold and they would not.
I aim to misbehave.
Mostly Harmless.
FWIW my 10.4X47 made at Torino in 1874 was .429 grooves measured at muzzle with a inside mic. I also fired a 240 gr. Sierra with a light load so it would stop mid bore and I eased it out the chamber end and it too had .429 groove dimension.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |