search for ghosthawks thread on making one, it has a lot of good advice and photos of several different ones members have done.
big problem I see is no drop ramp
if you are ever being chased by a taxidermist, don't play dead
thank you i have yet to make and weld on the drop ramp.
I was thinking of making a ramp and just bolting it to the pan with the drippers. Then I can take it off and adjust if needed. May lose a bit of heat but shouldn't e too bad.
Kraken Fan #69
i also was thinking of somthing like that but to the side of the pan with some sloted brackets.
Your pan is pretty deep, if you fill it up to the top with lead I would guess that you will get a steady stream of lead and no drips. Your ramp needs to be the same heat as the pan and I would think of thicker material so it will hold the heat better and not cool off. If the ramp is not hot the lead will stick or cool too fast and the drips will not round up well. Just my two cents. Good luck and keep us up to date with your project!
Mtgrs737
Still Learning!
NRA Life Member
Life long OZ resident
Personality type: Compulsive/Excessive - I don't know what that means, all I know is, if I like something, I want a lot of it!
Pray to put "One nation, Under God" back in our country! We will never be a Great Nation without HIM!
SOCIALISM is a PHILOSOPHY of FAILURE, the CREED of IGNORANCE and the GOSPEL of ENVY, It's inherent value is the EQUAL SHARING of MISERY. -Winston Churchill
Mic It looks to me like your ramp should be steeper. Guessing, but I'd say between 30 and 45 degrees.
thank you for the advice i was not going to fill it up only just enuf to cover the drippers. i can make the ramp thicker but my gas burner will be sitting nice and close to the ramp.
the ramp is at 28° the pan will be tiped to 12° when in use so that will make a total of 40°.
thank you for your imput.
sounds like a plan , let us know how it works
im almost done and ready to drop some lead in to it. ill pop up some more photos when i can.
Anticipation. Hope all goes well
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
hope to see some more on this, good luck
I am thinking of also making another one some time down the track that would be able to make shot all the way up to bb and maybe even #F sized shot.
Time is not money when it is spent doing somthing one loves to do.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |