Well I went out to my range and shot off a few rounds today. I started off just seeing how it handled with some cheap factory junk I had in 38 spec. Nice and soft. And way high. Well, what can you expect at 30 yds. So I traped back to my 100 yd spot and tried some more. Off hand, standing as I'm too cheap to buy a table and have been too lazy to build one. But I digress. Shot off some light 38special loads I'd made up for my revolver. 152 gr over 3.2 gr bullseye. And I'd made a few 4.5 gr SR4756 over the same bullet. All shot fine, I'm still tending on the high side, but most probably just me. Sweet gun, easy shooting. I think I'll be liking this thing a lot.
Sent from my KFAUWI using Tapatalk
Had a pound I bought a couple of years ago. Was saving for 9mm, but have plenty of other powder that'll work in those rounds
Sent from my SM-G892A using Tapatalk
In addition to two Rossi M92's in 45 Colt - bought the carbine Rossi M92 in 38 Spl and modified it to 32-20
Regards
John
I have a 44mag in a rifle and a 357 in a SRC. Both shoot well with cast or jacketed. I owned a Browning in 44 but had to sell a few years ago. I bought the rifle to replace it and later the SRC, just because. The Rifle beats the snot out of me and I do not remember the Browning being so abusive. I am 20+ years older and that probably makes a difference. I have thought about changing out the curved buttplate stock for a shotgun butt. Haven't done it yet and haven't found a 44 mag. in SRC to replace it with. My local shop has a Winchester 92 (new) on the shelf but it also has a curved butt and with a $900.00 tag it is more than I want to spend.
I started with a 20" stainless Rossi 92 in 38/357, too. Be careful, it will get lonely and want a friend. Here is mine with his buddy in .44.
A lighter extractor spring will keep it from sending the empties into orbit. Both of mine have bolt mounted peeps from Stevesgunz now. His video is handy for slicking it up.
Thanks, it wants a little brother 16"
I have the 16 inch 357. That is a VERY handy rifle. Mine wears a Trijicon dot sight on an NOE mount. Will not let that one get away from me....
Very nice. I actually traded for my first Rossi yesterday. I traded a Glock for a Puma 16" SS in 480 Ruger. I haven't taken any photos yet but I am excited to head to the range to test her out. Heard there were only about 100 of the 480 Rugers made.
I have two early guns; 45 Colt and 44-40. Both are pre-safety with brass followers.
NRA Life
NMLRA Life
F&AM
Binky
I found someone here that wanted the curved butt plate stock and had the shotgun style to trade.
We traded straight across with only cost . . .postage.
Much prefer the shotgun style
Amendments
The Second there to protect the First!
I have a Rossi .44 magnum on layaway 24" Octagon barrel tubular magazine 13 shots.I will be getting it out on or around the 24th of this month.
A blessing is everyday I wake up,after all i've been through in this lifetime!
Oorah,Semper Fi.
I got a Rossi Rio Grande 30-30 at wally world a few years ago for $267. The stock was nothing to get excited about, plain-poorly fitted, metal finish was excellent.
Have shot it a bit the last year. I found the stock cracked inside, will have to fix that and glass bed it. The action would not feed (lifter kept sticking) until I'd worked the lever about a thousand times, polished some burrs and Gunslicked all working parts. Accuracy is reasonable so far 1.5" groups@100 yards with a 5x scope.
I could not tell from the pictures, but is it already tapped for a side mount receiver sight?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |