Question for the 1911 gurus. I have always been a revolver guy, but finally broke the mold. Settled on and bought a Ruger sr1911 target in 45acp. After shooting a couple of different boolit styles, I've settled on the H&G 68. So, my question is, is a 68 a 68 is a 68 or is there a particular mould or maker that is normally more accurate than the others. While every gun is individual, there must be one or another that is usually better overall. For instance, Just today, I shot some accurate molds clones of the 68. While very accurate, they do not cut the clean hole that the #68 is known for. I can live with that, but if I can get both in the same mould, that would be even better.
Thanks in advance for your knowledge and advice.
Kirk