So I've been trying to load a ton of 9mm for plinking. I ran into some of my ammo that didn't fit the chamber correctly and locked the slide. I've been shooting out of mostly glocks and bought a 100 round case gauge to check my ammo. I have found a lot of my ammo doesn't check out with the case gauge.
I read using a 9x18 makarov lee fcd with three internals removed works to resize the bottom of the case. I ran 10 through and only one passed the case gauge.
I know lee makes a bulge buster where you will use the 9x18 makarov die, but my question is, will the lee bulge buster actually do anything that the makarov die doesn't already or is it just an extension? Or should I just buy an undersized sizing die and scrap all the loaded rounds that didn't pass the case gauge?
Sent from my SM-G955U using Tapatalk