i just got 2 cans of HODGENS H-4831, dated NOV. 12TH. 1973. card board cans with metal pop top and metal bottom. still smells good no acrid smells. question can i use IMR- 4831 loads with this powder?
i just got 2 cans of HODGENS H-4831, dated NOV. 12TH. 1973. card board cans with metal pop top and metal bottom. still smells good no acrid smells. question can i use IMR- 4831 loads with this powder?
They are similar but not the same. Most reloading manuals list data for both. I would consult a good manual for the loads for the cartridge you intend to load. I never use data off personal posts on gun sites. Most will be reliable but some will not be and I don't take chances. my experience anyway, james
Call or e,ail Hodgdon and ask their experts.
try going here
http://castpics.net/LoadData/Freebie...don%202002.pdf
data from 2002
Do not use IMR Data it is different
I called HODGENS and talked to a tech. and he said in no way are they interchangeable!! do not use IMR, loading data with H, LOADING DATA.!!
Interesting reply ... from the Hodgdon Burn Rate Table for Relative QuicknessI called HODGENS and talked to a tech. and he said in no way are they interchangeable!! do not use IMR, loading data with H, LOADING DATA.
124 IMR 4831 ... slower than H4831!
128 Hodgdon H4831 & H4831SC
Regards
John
It is slower than the IMR. What are you loading in a 30/06 I would shoot a case full with a 180 grain bullet. It was not over pressured.
I bought cans like yours in the early 70's from $1.00 to $1.50 a can finally shot up all I had in the 90's. To go back to those prices!!!!
This is all good advice. "Can you tell me a good load... " is generally a bad question when asked of non-accountable strangers. You won't get bad advice all the time, perhaps very seldom, but how often do you need?
As long as there is no acrid smell or dusty residue, the question of age is about taken care of.
No company employee will give advice on anything anymore,they are lawsuit sensitive.....You try calling a steel supplier and asking what size beam you need for a project....no way will you get an answer.
I recall those days. My LGS had a steel drum in back. They sell a double bagged paper sack at $.40 per pound./beagle
diplomacy is being able to say, "nice doggie" until you find a big rock.....
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |