Ok so I have been getting started shooting PC boolits. The last time I went to the range I shot PC boolits. I cleaned my Redhawk with #9 as normal.
I took it out today and shot only traditional lubed boolits. I was using a slightly reduced load (not hot at all).
My cases kept sticking in my chambers to the point i had to pop the extractor to get them to budge. I Figured this had to be PC residue. I got a can of lacquer thinner and scrubbed the cylinder with it on a bronze brush and that seems to have taken care of it. I just thought I would post this in case some one else is having the same trouble.