I remember seeing someone here that will mod a LEE push through.
I need one that will size .379 and one .380 for my marlin 38-55
I remember seeing someone here that will mod a LEE push through.
I need one that will size .379 and one .380 for my marlin 38-55
Failure is not an Option
lee does it....
they are right now making three custom sizes for me as i type!
.387
.369
.420
they made me one 3 weeks ago at .471
NOE has them in stock
375Cal .379 Body Bushing (B379) $9.75
http://noebulletmolds.com/NV/product...oducts_id=2554
375Cal .380 Body Bushing (B380) $9.75
http://noebulletmolds.com/NV/product...oducts_id=2555
375Cal Push Rod $7.50
http://noebulletmolds.com/NV/product...oducts_id=2559
You need to buy their Push through size die body $39.95
http://noebulletmolds.com/NV/index.php?cPath=104_410
Once you have the Push through size die body $39.95
the body bushings run $9.75 per size
one push rod covers everything in that caliber $7.50 [Lee push through dies work]
diameter changes will cost less money
you have a lot more diameters to choose from
they also have nos sizing bushings
you can use the Lee red boolit catcher thingy
AND you can store a lot more dies in a smaller container
Before I discovered NOE size dies I would enlarge Lee size dies with a dowel and sandpaper
Last edited by Grmps; 03-06-2018 at 04:07 PM.
If you need .379 and .380, how large are you bullets casting?
Ah, I see and LEE makes nothing close.
Buckshot used to do it, but he no longer does.
I have had DougGuy do several for me and have been happy with the results.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
I just ordered push through bushings from NOE and also a couple case neck expanders ( these are made to work with Lee's case neck expander die). Must have stuff for cast boolit rifle shooting.
Get the lee die that is just under the size you want, thy are not that hard to lap out to the size you want. A split rod and some fine wet/dri sand paper is all you need.
I just started casting, got the first Lee push through sizer. needed to go up a size. Its 30.00 to have one made at Lee, they will make any
size you ask. I opted for the bushing sizer from NOE. Each bushing is 9.95 and you need one push rod per caliber at 7.00. For the price of 1 Lee, I got 3 for my 38's and got 2 for the 44
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |