ive a 96 action that the bolt will not open with the safety straight up and the safety cannot be swiched on after the bolt has been cocked.
I'm guessing this is bad news =(
ive a 96 action that the bolt will not open with the safety straight up and the safety cannot be swiched on after the bolt has been cocked.
I'm guessing this is bad news =(
Are the bolt parts matching and original?
Shoot Safe,
Mike
Retired Telephone Man
NRA Endowment Member
Marion Road Gun Club
( www.marionroad.com )
Make sure they bolt shroud is screwed all the way in. This is normally done with the safety in the up position at 12 o'clock. The 96 safety works left- fire, center- safe/takedown, and right- safe/locked bolt or uncocked and locked.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Inspect the cocking piece too. Burrs and wear will cause issues.
Be safe
When it's all the way in, it hits a stop- the bolt handle base.
Here you go.
https://youtu.be/Ne4NlgeqIg8
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |