One more vote for the 98 gr RCBS, for all the reasons mentioned. Also it makes a very pretty round.
One more vote for the 98 gr RCBS, for all the reasons mentioned. Also it makes a very pretty round.
I don't paint bullets. I like Black Rifle Coffee. Sacred cows are always fair game. California is to the United States what Syria is to Russia and North Korea is to China/South Korea/Japan--a Hermit Kingdom detached from the real world and led by delusional maniacs, an economic and social basket case sustained by "foreign" aid so as to not lose military bases.
The RCBS swc for game and target, Lee 90 swc and 2.5 gr red Dot for low velocity target.
[The Montana Gianni] Front sight and squeeze
Anyone use the RCBS wadcutter? I'm thinking of ordering one since I can't find the SWC in stock anywhere and the Lee SWC should be ok for a little while longer. Also, if anyone knows, how does the size of the meplat compare on the Lee SWC to the RCBS'? Thanks
The RCBS WC design is a very good bullet. In my revolvers it has delivered good groups to 25 yards with consistency. In my .32 match gun (with a tight bore and fast twist) it gives excellent accuracy out to 50 meters.
The RCBS SWC has a larger meplat than the Lee SWC by a fair margin. Below is a sampling of .32 bullets, including both the Lee SWC and the RCBS SWC. I need to get an updated photo sometime to show some of the rest of the collection...
L-R: .313" RB, custom 80 gn .315 DEWC, lee 85 gn TL DEWC, Lyman 313492 type 3 WC, Lyman 313445 SWC, Lee .314-90 TL SWC, Lyman 313631 GC SWC, Custom 110 gn .315 SWC, RCBS 32-098 SWC, Ideal 31133 HP, Lyman 311008 RNFP, Lee 100 gn .311 RN, Lyman 311410.
Oh, and here's an example of a group shot through my single six 5.5" with the Ideal 31133 (311008 HP) at 25 yards:
Last edited by NoZombies; 08-15-2013 at 03:36 PM.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
Thanks for the visual No Z. I've got my WC ordered, now I think I need to keep my eyes open for a 31133 after seeing the bullet and your results. Thanks.
Like others have said all of my 32 h&r mags like the following RCBS 32-098 SWC, Ideal 31133 HP, Lyman 311008 RNFP with several different powders.
NOE makes a great 115 grain Keith SWC mold that is a .32 version of the Lyman #358429. It is a great long range bullet in the .32 S&W Long and the 32-20.I have a 5 cavity plain base that is a joy to use.
Don't get too hung up on it being the 31133, the 311008 is very nearly as good in my gun, and would probably be better in someone else's. (I find that my guns think it's funny to like best the bullet design that I have a single cavity mold for, instead of the one that I have a 4 cavity mold for...)
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
Oh my! I thought the 6 or 7 different bullets I have was a good selection... you've got me completely beat. I'm trying to settle down to about 4 or 5 that I will actually use, the Ideal 323445 and 313492 at about 95 gr each (which I have now in double cavity) the MP 100 grain hollow point 314640 (which I ordered on a Group Buy over a year ago) ) the 115 grain 3118 (which I have single cavity but still am trying to find in DC) and the NOE 314008 which came out bigger than expected at 125 grains.) I think that will pretty well meet my needs without too much overlap. I have to feed S&W 32 Hand Ejectors (32 S&W Long) and a couple of 327 Fed Mags from Ruger and S&W (this latter a custom stainless K-frame.)
Froggie
That's an old picture now. It represents maybe 1/3 of the .32 molds I currently have.
One of these days I'll line up examples and take some more photos. Just not enough time here lately!
I've got a half dozen or so that I use more than the rest, but for me collecting the molds is part of the hobby!I'm trying to settle down to about 4 or 5 that I will actually use
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
I bought a Ruger Bisley model 327 Federal Magnum with an 8 round cylinder a year ago. I only use cast from my RCBS 32-98 mold. I had trouble finding brass so I bought a bunch of 32 H&R Magnum brass and it works just fine for mid range and target use.
This is a really nice shooting target gun but with a 5 1/2" barrel a bit much for concealed carry. However I live in Nevada, an open carry state, so I pack it in a belt holster and I have yet to be harassed by the police anywhere. However I do not waltz around with it in casinos or on the strip.
Pax Nobiscum Dan (Crash) Corrigan
Currently casting, reloading and shooting: 223 Rem, 6.5x55 Sweede, 30 Carbine, 30-06 Springfield, 30-30 WCF, 303 Brit., 7.62x39, 7.92x57 Mauser, .32 Long, 32 H&R Mag, 327 Fed Mag, 380 ACP. 9x19, 38 Spcl, 357 Mag, 38-55 Win, 41 Mag, 44 Spcl., 44 Mag, 45 Colt, 45 ACP, 454 Casull, 457 RB for ROA and 50-90 Sharps. Shooting .22 LR & 12 Gauge seldom and buying ammo for same.
Crash, have you checked with Starline Brass for 327 Fed Mag? They made a run of them last year, and I stocked up with a batch of 1000. I don't know what is in stock at this point, but it would be worth checking.
Froggie
PS Just checked; they are currently listed as on backorder. They say they will make another run when backorders are sufficient to justify. I sure am glad I went on and ordered when I did to feed my Blackhawk and Model 616!
Last edited by Green Frog; 08-21-2013 at 03:52 PM.
You can also try Freedom Arms for 327 brass, Bought my supply there, starline.
Crash87
"An art, to supply a truthful response to someones nagging, busy bodied question(s) such that the person feels as though their question has been answered, but yet, do not understand the answer and are unable to provide a follow up question to gain clarification for fear of appearing to be a dumb ***, when basically having to repeat the question
"LIBERALS ARE ALOT LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS."
Id like to see it too! Bet there are even a "Few" more on hand for the family portrait now
“You don’t practice until you get it right. You practice until you can’t get it wrong.” Jason Elam, All-Pro kicker, Denver Broncos
Real good luch with the Lee soupcan bullet. Plenty of punch and very good accuracy.
The Soupcan is a GREAT bullet if your mould casts them fat enough for the involved 32 revolvers. Most of my 32s want a .313"-.314", though. My Lee C309-113 castings won't cast larger than .311" plus a couple tenths. THIS IS NOT A "KNOCK" ON THE LEE MOULD--it is spec'ed for nominal 30 caliber applications. It shoots great in my 30 Carbine Blackhawk, my 30/30 rifles, and in my 30-06.
My RCBS 32-98-SWC drops at .315"+ in 92/6/2 and .3145" in pure lead. VERY useful at those dimensions--the flawed castings become donor slugs for the 9.3 x 62 cast as softpoints, and the good ones get loaded into 32 S&W Long ammo. There IS a place for very soft lead bullets In The Big Picture--they shoot WONDERFULLY at 700-800 FPS in a revolver, with the caveat that they are well-sized for the gun. Size them right and give them a bit of Alox/BW, and you have a small game-taking machine in your holster.
Last edited by 9.3X62AL; 02-19-2018 at 03:27 PM.
I don't paint bullets. I like Black Rifle Coffee. Sacred cows are always fair game. California is to the United States what Syria is to Russia and North Korea is to China/South Korea/Japan--a Hermit Kingdom detached from the real world and led by delusional maniacs, an economic and social basket case sustained by "foreign" aid so as to not lose military bases.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
I have a old lyman 313445. works good with heavy loads in my s & w model 31. same load and case in my ruger s.s. .32 mag. drops groundhogs nice.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |