I currently use lanolin-castor oil mixture for my Lube needs.
In my Corbin dies, very little to zero Lube is recommended in the two step core seat of the boat tail dies.
I'm venturing into subsonic Bullets with the X shaped core seat punch. It is considered most helpful if you lube the X shaped core cavity with lube prior to point form.
I will also need to lube the outside of the jacket prior to point form.
I'm considered a dip lube to accomplish both in one step. Dillon case lube is just lanolin and isopropyl alcohol. I think it is too thin for point form. It may work for the lubrication of the core cavity.
Has anyone here came up with a different lube to dip components, drain the excess, and allow the solvent to evaporate off?